NanoBubble-Mediated Oxygenation: Elucidating the Underlying Molecular Mechanisms in Hypoxia and Mitochondrial-Related Pathologies.

Worldwide, hypoxia-related conditions, including cancer, COVID-19, and neuro-degenerative diseases, often lead to multi-organ failure and significant mortality. Oxygen, crucial for cellular function, becomes scarce as levels drop below 10 mmHg (<2% O2), triggering mitochondrial dysregulation and activating hypoxia-induced factors (HiFs). Herein, oxygen nanobubbles (OnB), an emerging versatile oxygen delivery platform, offer a novel approach to address hypoxia-related pathologies. This review explores OnB oxygen delivery strategies and systems, including diffusion, ultrasound, photodynamic, and pH-responsive nanobubbles. It delves into the nanoscale mechanisms of OnB, elucidating their role in mitochondrial metabolism (TFAM, PGC1alpha), hypoxic responses (HiF-1alpha), and their interplay in chronic pathologies including cancer and neurodegenerative disorders, amongst others. By understanding these dynamics and underlying mechanisms, this article aims to contribute to our accruing knowledge of OnB and the developing potential in ameliorating hypoxia- and metabolic stress-related conditions and fostering innovative therapies.

Anatomical Conditions in Simultaneous Orthognathic Surgery and Structural Rhinoplasty. A Clinical Series / Condiciones Anatómicas en Cirugía Ortognática y Rinoplastia Estructural Simultanea. Una Seria Clínica

SUMMARY: Orthognathic surgery and rhinoplasty show synergy in terms of function and aesthetic results. The aim of this research is to analyze variables related to simultaneous orthognathic surgery and rhinoplasty and to discuss the surgical sequence. Male and female subjects between 18 and 45 years old were included in this research. Diagnosis related to nasal morphology (nasal tip bifid, rotate, square and others as well as the alae morphology and columella), facial deformity (sagittal and vertical deformity), type of surgery (rhinoplasty techniques and orthognathic techniques) and complications were included. The minimum follow-up was 12 months; Chi- Square and t test were used to define correlations, considering a value of p<0.05 for statistical significance. Class III facial deformity was observed in 40 % of subjects and class II facial deformity was present in 43 %. For the nasal deformities, the tip and nasal bridge were most prevalent; primary nasal deformity was observed in the 83 % of subjects and was significant more than secondary nasal deformity (p=0.042). Bimaxillary surgery was performed in 31 cases (88 %). In 10 cases a change of the original plan for rhinoplasty due to previous maxillary surgery was realized, mainly in class III facial deformity, with no statistical differences. Revision rhinoplasty was realized in 5 cases (14 %) and was not related to surgical variables; revision for orthognathic surgery was not necessary in this series. Rhinoplasty and orthognathic surgery simultaneously show low complications and predictable results. We can conclude that maxillary mandibular osteotomies and rhinoplasty could be performed safely. However, larger studies are necessary to understand the best choice and variables involved in simultaneous procedures and soft tissue response.

La cirugía ortognática y la rinoplastia muestran sinergia en términos de resultados funcionales y estéticos. EL objetivo de esta investigación es analizar variables relacionadas con la cirugía ortognática y rinoplastia ejecutada de forma simultanea. Fueron incluidos hombres y mujeres entre 18 y 45 años de edad. EL diagnóstico fue en base a la morfología nasal (punta bífida, rotada, cuadrada u otras así como alteraciones del ala nasal y columela), deformidad facial (deformidad sagital y vertical), tipo de cirugía (técnica de rinoplastia y cirugía ortognática) y complicaciones asociadas. El seguimiento mínimo fue de 12 meses; se utilizo las prueba t test y chi cuadrado para definir relaciones estadísticas considerando un valor de p< 0,05 para obtener diferencias significativas. La deformidad clase III fue observada en el 40 % de los sujetos y la deformidad facial de clase II se presento en el 43 %. Para la deformidad nasal, las alteraciones de a punta nasal y nasal fueron mas prevalentes; la deformidad nasal primaria se presentó en el 83 % de los sujetos y fue significativamente mayor que la deformidad nasal secundaria (p=0,042). La cirugía bimaxilar se realizó en 31 casos (88 %); en 10 casos se realizó el cambio del plan quirúrgico inicial de la rinoplastia debido a cambios generados en la cirugía maxilar previa, mayormente en deformidad facial de clase III, sin presentar diferencias significativas. La rinoplastia de revisión fue realizada en 5 casos (14 %) y no fue relacionada con ninguna variable de tipo quirúrgica; la revisión de cirugía ortognática no fue realizada en ningún caso de esta serie. La rinoplastia y la cirugía ortognática simultanea mostraron bajas complicaciones y resultados predecibles. Se puede concluir que la osteotomía maxilo mandibular y la rinoplastia son seguras; sin embargo, estudios de mayor volumen son necesarios para entender la mejor opción y variables relacionadas con procedimientos simultáneos y la respuesta de tejidos blandos faciales.

Early Treatment of Unilateral Condylar Hyperplasia in Adolescents: Preliminary Results.

Facial asymmetry associated with unilateral condylar hyperplasia (UCH) is a rare disease. The aim of this study was to evaluate the clinical conditions of progressive facial asymmetry in young subjects treated with high condylectomy. A retrospective study was performed including nine subjects diagnosed with UCH type 1B and progressive facial asymmetry around 12 years old with an upper canine progressing towards dental occlusion. After an analysis and a decision of treatment, orthodontics began one to two weeks prior to the condylectomy (with a mean vertical reduction of 4.83 ± 0.44 mm). Facial and dental asymmetry, dental occlusion, TMJ status and an open/closing mouth were analyzed before surgery and in the final stage of treatment, almost 3 years after surgery. Statistical analyses were performed using the Shapiro-Wilk test and a Student's t-test considering a p value of <0.05. Comparing T1 (before surgery) and T2 (once orthodontic treatment was finalized), the operated condyle showed a similar height to that observed in stage 1 with a 0.12 mm difference in height (p = 0.8), whereas the non-operated condyle showed greater height increase with an average of 3.88 mm of vertical growth (p = 0.0001). This indicated that the non-operated condyle remained steady and that the operative condyle did not register significant growth. In terms of facial asymmetry in the preoperative stage, a chin deviation of 7.55 mm (±2.57 mm) was observed; in the final stage, there was a significant reduction in the chin deviation with an average of 1.55 mm (±1.26 mm) (p = 0.0001). Given the small number of patients in the sample, we can conclude that high condylectomy (approx. 5 mm), if performed early, especially in the mixed-dentition stage before full canine eruption, is beneficial for the early resolution of asymmetry and thus the avoidance of future orthognathic surgery. However, further follow-up until the end of facial growth is required.

Bio-Inspired Muco-Adhesive Polymers for Drug Delivery Applications.

Muco-adhesive drug delivery systems continue to be one of the most studied for controlled pharmacokinetics and pharmacodynamics. Briefly, muco-adhesive polymers, can be described as bio-polymers that adhere to the mucosal (mucus) surface layer, for an extended residency period of time at the site of application, by the help of interfacial forces resulting in improved drug delivery. When compared to traditional drug delivery systems, muco-adhesive carriers have the potential to enhance therapeutic performance and efficacy, locally and systematically, in oral, rectal, vaginal, amongst other routes. Yet, the achieving successful muco-adhesion in a novel polymeric drug delivery solution is a complex process involving key physico-chemico-mechanical parameters such as adsorption, wettability, polymer chain length, inter-penetration and cross-linking, to list a few. Hence, and in light of accruing progress, evidence and interest, during the last decade, this review aims to provide the reader with an overview of the theories, principles, properties, and underlying mechanisms of muco-adhesive polymers for pharmaceutics; from basics to design to characterization to optimization to evaluation to market. A special focus is devoted to recent advances incorporating bio-inspired polymers for designing controlled muco-adhesive drug delivery systems.

Thermal Load and Heat Transfer in Dental Titanium Implants: An Ex Vivo-Based Exact Analytical/Numerical Solution to the 'Heat Equation'.

INTRODUCTION: Heat is a kinetic process whereby energy flows from between two systems, hot-to-cold objects. In oro-dental implantology, conductive heat transfer/(or thermal stress) is a complex physical phenomenon to analyze and consider in treatment planning. Hence, ample research has attempted to measure heat-production to avoid over-heating during bone-cutting and drilling for titanium (Ti) implant-site preparation and insertion, thereby preventing/minimizing early (as well as delayed) implant-related complications and failure. OBJECTIVE: Given the low bone-thermal conductivity whereby heat generated by osteotomies is not effectively dissipated and tends to remain within the surrounding tissue (peri-implant), increasing the possibility of thermal-injury, this work attempts to obtain an exact analytical solution of the heat equation under exponential thermal-stress, modeling transient heat transfer and temperature changes in Ti implants (fixtures) upon hot-liquid oral intake. MATERIALS AND METHODS: We, via an ex vivo-based model, investigated the impact of the (a) material, (b) location point along implant length, and (c) exposure time of the thermal load on localized temperature changes. RESULTS: Despite its simplicity, the presented solution contains all the physics and reproduces the key features obtained in previous numerical analyses studies. To the best of our knowledge, this is the first introduction of the intrinsic time, a "proper" time that characterizes the geometry of the dental implant fixture, where we show, mathematically and graphically, how the interplay between "proper" time and exposure time influences temperature changes in Ti implants, under the suitable initial and boundary conditions. This fills the current gap in the literature by obtaining a simplified yet exact analytical solution, assuming an exponential thermal load model relevant to cold/hot beverage or food intake. CONCLUSIONS: This work aspires to accurately complement the overall clinical diagnostic and treatment plan for enhanced bone-implant interface, implant stability, and success rates, whether for immediate or delayed loading strategies.

Cambios en la vía aérea después de cirugía ortognática bimaxilar / Airway change after bimaxillary orthognathic surgery

RESUMEN: La cirugía ortognática se realiza en sujetos con algún tipo de alteración esqueletal. Los movimientos maxilo mandibulares tienen impacto en la vía aérea (VA) y este aspecto se debe incorporar en la planificación quirúrgica. El objetivo de esta investigación fue determinar los cambios generados en la VA después de realizada la cirugía ortognática. Se realizó un estudio piloto incluyendo 51 sujetos con deformidad facial de clase II y clase III; se incluyeron en base al estudio del ángulo ANB y el tipo de oclusión dentaria. Se realizaron estudios con tomografía de haz cónico identificando el volumen máximo en la vía área y las áreas mínimas y máximas; además se incluyó la posición del hueso hioide y la inclinación del plano mandibular para relacionar con la morfología de la VA; para definir significancia estadística se estableció un valor de p<0,05 incluyendo las pruebas T de student y T test. Los resultados indicaron que los sujetos clase II aumentaron significativamente el volumen y áreas máximas y mínimas de la VA; los sujetos de clase III esqueletal no presentaron diferencias significativas entre la etapa pre y post quirúrgica; el hueso hioides se presentó significativamente más anterior en ambos en casos de clase II y clase III. Es posible concluir que la VA mejora sustancialmente en sujetos con clase esqueletal facial tipo II y que se mantiene sin cambios en sujetos con clase facial tipo III.

SUMMARY: Orthognathic surgery is performed in subjects with some type of skeletal alteration. Maxillomandibular movements have an impact on the airway (AW) and this aspect must be included into surgical planning. The aim of this research is to determine the changes in the AW after orthognathic surgery. A pilot study was conducted including 51 subjects with class II and class III facial deformity; they were included using the ANB angle and the type of dental occlusion. Cone beam computed tomography were performed showing the maximum volume in the airway and the minimum and maximum areas; in addition, the position of the hyoid bone and the angle of the mandibular plane were included to relate it to the morphology of the AW; to define statistical significance, a value of p<0.05 was established, including the student's t-test and the t-test. The results showed that class II subjects significantly increased the volume and maximum and minimum areas of the AW; skeletal class III subjects did not presented significant differences between the pre- and post-surgical stage; the hyoid bone was in an anterior position in both class II and class III cases. It is possible to conclude that AW improves substantially in subjects with facial class II and remains unchanged in subjects with facial class III.

Morfología ósea facial en cirugía ortognática. ¿existe tendencia hacia el avance facial? / Facial morphology in orthognathic surgery: is there a facial advance trend?

RESUMEN: El objetivo de esta investigación fue determinar los movimientos preferidos en maxila y mandíbula para obtener normalidad en morfología facial utilizando técnicas de superimposición en análisis 3D. Se realizó un estudio descriptivo para evaluar el desplazamiento óseo bimaxilar y del hueso hioides en sujetos clase facial tipo II y clase facial tipo III sometidos a cirugía ortognática. Para la superimposición se utilizó como puntos fijos Nasion - Silla - Porion y la sutura cigomática-maxilar. Estos puntos se superpusieron en CBCT pre quirúrgico y postquirúrgico y se evaluó el desplazamiento de la espina nasal anterior, Punto A, Punto B, mentón y del hueso hioides. Para la evaluación y comparación de las variables continuas antes y después de la cirugía ortognática se utilizó la prueba T de Student. Para la correlación entre las variables, se utilizó el Test de Spearman considerando un valor p<0,05 como diferencia significativa. 44 sujetos de entre 18 y 40 años de ambos sexos, fueron incluidos en esta investigación. En el 90 % de los sujetos se realizó un movimiento sagital de avance de la maxila. El movimiento sagital de avance mandibular se realizó en el 100 % de los sujetos con clase facial tipo II, mientras que el 100 % de los sujetos con clase facial tipo III se realizó se le retroceso mandibular. El hueso hioides presentó un avance en 26 de los 27 sujetos con clase facial tipo III. Es posible concluir que existe una tendencia al avance maxilar independiente de la deformidad facial.

ABSTRACT: The objective of this research was to determine the preferred movements in the maxilla and mandible to obtain normality in facial morphology using superimposition techniques in 3D analysis. A descriptive study was carried out to evaluate bimaxillary bone displacement and hyoid bone in subjects facial class II and facial class III undergoing orthognathic surgery. were used as fixed points for superimposition: Nasion (N) - Silla (S) - Porion (Po) and the zygomatic-maxillary suture (Z). These points were superimposed in pre-surgical and post- surgical CBCT and was evaluated to displacement of the anterior nasal spine, Point A, Point B, Chin and the hyoid bone. For the evaluation and comparison of continuous variables before and after orthognathic surgery, was used the Student's t test. For the correlation between the variables, the Spearman test is used, considering a p value <0.05 as a significant difference. 44 subjects between 18 and 40 years old of both sexes were included in this research. A 90% of subjects a was performed a maxillay sagittal movement. The sagittal movement of mandibular advancement was performed in 100% with facial class type II, while 100 % of the subjects with with facial class type III had a mandibular recession. The hyoid bone advanced in 26 of the 27 subjects with facial class type II. It is possible to conclude that there is a tendency for maxillary advancement, independent of facial deformity.

Neuro-Muscular Dentistry: the "diamond" concept of electro-stimulation potential for stomato-gnathic and oro-dental conditions.

Oro-Pharyngeal Dysphagia - or simply dysphagia - is the difficulty (persistent) in swallowing/passing food and/or liquid from the mouth to the pharynx into the esophagus and finally the stomach; a deglutition disorder (a symptom, by definition, often due to neuro-degenerative/-muscular, drug-induced or localized structural pathologies such as head and neck tumors, lesions and associated surgical and/or radiation injuries) linked to severe consequences on Quality of Life (QoL), including malnutrition, dehydration, and even sudden death. Likewise, Temporo-Mandibular Jaw and Joint disorder(s) - or simply TMD - is a multifactorial etiological condition, regularly encountered in the dental office. Whether due to malocclusion, bruxism, stress and/or trauma, TMD destabilizes the whole cranio-mandibular system structurally and functionally, via affecting mastication, teeth, supporting structures, comfort and aesthetics, and thus, QoL, again. While several treatment regimens do exist for such conditions, some of which have been standardized for use over the years, most continue to lack proper evidence-based literature support. Hence, (1) caution is to be exercised; and (2) the need for alternative therapeutic strategies is amplified, subsequently, the door for innovation is wide open. Indeed, neuromuscular electrical stimulation or "NMES", is perhaps a fine example. Herein, we present the interested oro-dental health care provider with an up-dated revision of this therapeutic modality, its potential benefits, risks and concerns, to best handle the dysphagic patient: an intra-disciplinary approach or strategy bridging contemporary dentistry with speech and language therapy; a rather obscure and un-discovered yet critical allied health profession. A pre-clinical and clinical prospectus on employing inventive NMES-based regimens and devices to manage TMD is also highlighted.

Horizontal ridge augmentation of a single atrophic site in the anterior maxilla using hydroxyapatite and rhBMP-2 / Augmento óseo horizontal de reborde alveolar en sitio atrófico único en maxila anterior usando hidroxiapatita y rhBMP-2

SUMMARY: Bone morphogenetic protein (rhBMP-2) is a powerful osteo-inductive growth factor widely used in bone reconstruction and both the vehicle used to administer it and the scaffold substrate could determine its success in clinical situations. The aim was to analyse the clinical behaviour of dental implants placed in single alveolar ridges with a horizontal deficiency in the maxillary anterior region that were reconstructed horizontally with rhBMP-2 and porous hydroxyapatite (HA). Inclusion criteria were both males and females, between the ages of 18 and 29 with single tooth loss of one upper incisor. Cone Beam Computed Tomography (CBCT) was used to take measurements prior to bone augmentation and again prior to the implant insertion. Surgery was carried out under local anaesthetic. In the primary procedure, bone substitute was introduced using porous HA and rhBMP-2; after 4 to 5 months, dental implant surgery was carried out and the implant placed; after 3 months of consolidation the provisional prosthesis was placed and then a definitive restoration was placed. Variables were analysed using the t-test with a p-value of < 0.05 in order to assess statistical significance. Thirteen subjects were included (6 females and 7 males). Bone augmentation resulted in a bone gain of 4.15mm (p=0.023), which was shown to be statistically significant. All of the grafts placed were successful and 13 implants were placed, using torques between 30 and 70N, without complications. For the final prostheses, 11 were screw retained and 2 were cemented in place. The horizontal bone augmentation using HA and rhBMP-2 is an efficient technique for single bone defects in the anterior maxillary area; clinical trials on a larger scale are needed to confirm these results.

RESUMEN: La proteína ósea morfogenética (BMP-2) es un potente osteoinductor utilizado ampliamente en técnicas reconstructivas; el vehículo de instalación es determinante en su evolución. El objetivo fue analizar el comportamiento clínico de implantes dentales instalados en rebordes alveolares únicos con deficiencia horizontal del sector anterior reconstruida horizontalmente con BMP-2 e hidroxiapatita (HA) porosa. Fueron incluidos sujetos de ambos sexos de entre 18 y 29 años, con pérdida dentaria unitaria a nivel de incisivos superiores. Se utilizó tomografía computadorizada para realizar mediciones en las etapas previa a la instalación del injerto y previo a la instalación del implante. Las cirugías fueron realizadas bajo anestesia local. En la primera intervención se realizó la instalación del injerto óseo utilizando HA porosa y BMP-2; después de 4 a 5 meses se realizó la instalación del implante dental; 3 meses después se realizó la conexión protésica y rehabilitación final. Las variables fueron estudiadas con la prueba t test considerando el valor de p< 0,05 para considerar significancia estadística. Trece sujetos fueron incluidos (6 mujeres y 7 hombres); con la reconstrucción ósea se obtuvo una ganancia ósea de 4,15mm (p=0.023) que fue estadísticamente significativo. No existió pérdida en ningún injerto realizado; se instalaron 13 implantes con torques entre 30 y 70N sin complicaciones; se realizaron prótesis fijas atornilladas en 11 casos y cementadas en 2 casos. La técnica con HA y BMP- 2 es eficiente para reconstruir defectos horizontales en perdidas unitarias del sector anterior maxilar; ensayos clínicos de mayor escala son necesarios para confirmar estos resultados.

Características morfocuantitativas de la glándula submandibular de ratón (Mus musculus) / Morphocuantitative characteristics of the mouse (Mus musculus) submandibular gland

El ratón (Mus musculus) es un buen modelo animal de experimentación, donde sus glándulas salivales han sido utilizadas en estudios, especialmente de tipo preclínico. Sin embargo, las diferencias en la morfología de estas glándulas y, en particular de las submandibulares, entre humanos y roedores no son de conocimiento común. Por lo anterior, el objetivo de este estudio fue conocer las características morfocuantitativos de la glándula submandibular del ratón macho C57BL/6. Se utilizaron cinco ratones macho, cepa C57BL/ 6, de 11 a 13 semanas de nacidos, con un peso promedio de 30 g. Luego de su ambientación, los ratones fueron eutanasiados. Para el análisis histológico, las glándulas fueron extraídas y fijadas en formalina tamponada por 48 horas, procesada para su inclusión en paraplast y teñidas con hematoxilina y eosina, azul alcián pH 2,5, ácido peryódico de Schiff y Picrosirius Red. Se determinaron las características estereológicas de densidad de longitud (LVcond), de volumen (VVcond) y de superficie (SVcond) de los conductos. En las células acinares se evaluó la densidad de número (NVcel) y la densidad de volumen (VVcel). Para cada variable se obtuvo la media ± desviación estándar. La glándula submandibular se encontraba organizada de manera lobulada, cuyo parénquima era de tipo túbuloacinar mixto con predominio seroso, que se conectaba a través de conductos. Las células acinares presentaban reacción positiva para azul alcián y ácido peryódico de Schiff. El estroma de la glándula contenía principalmente colágeno tipo 1. Los resultados de las mediciones estereológicas fueron: LVcond = 220,02 ± 50,51 mm/mm3; VVcond = 50,48 ± 9,55 %; SVcond = 26,39 ± 5,45 mm2/mm3; NVcel = 16,85 x 104 ± 9,13 × 104/mm3; VVcel = 24,98 ± 6,22 %. Con los análisis presentados es posible realizar investigaciones experimentales, considerando las similitudes y diferencias morfocuantitativas que presenta la glándula submandibular de ratón macho, cepa C57BL/6 con la del humano.

The mouse (Mus musculus) is a good experimental animal model, where murine salivary glands have been widely used in research by their similarities with human glands. Stereology is a tool that has to demonstrated to be valuable in biomedical researc h. Therefore, the objective was to realize an analogy between morphology, function and morpho-quantitative characteristics of the C57BL/6 mouse submandibular gland. Five male mice, C57BL/6, from 11 to 13 weeks old were used, with an average weight of 30 g. After seven days, the mice were euthanized and the samples were extracted. Then, these were processed following the conventional histological processing protocol and stained with H&E, Picrosirius Red, AA and PAS. Finally, the histological and stereological analysis of the samples was performed. In the glandular ducts the length density (LVcond), volume density (VVcond) and surface density (SVcond) were determined; whereas, in the acinar cells the density of number (NVcel) and the density of volume (VVcel) were evaluated. For each stereological variable the mean ± standard deviation was obtained. The histological study revealed no discrepancies as previously described. Descriptive statistical analysis revealed the following: LVcond = 220.02 ± 50.51 mm/mm3; VVcond = 50.48 ± 9.55 %; SVcond = 26.39 ± 5.45 mm2/mm3; NVcel = 168467.38 ± 91288.67 /mm3 and VVcel = 24.98 ± 6.22 %. From this study, it will be possible to conduct comparative experimental research analyzing quantitative results from those presented in this research. From this study, it will be possible to carry out comparative experimental research, analyzing quantitative results from those presented in this investigation.

COVID-19 y la odontología: una revisión de las recomendaciones y perspectivas para Latinoamérica / COVID-19 and dentistry: a review of recommendations and perspectives for Latin America

COVID-19 es una enfermedad altamente contagiosa y potencialmente mortal que nos acompañara por largo tiempo. Las profesiones de la salud y la vida en general ha sido afectada de forma significativa en todo lugar del mundo. La odontología ha pasado de una etapa de gran desarrollo clínico a una etapa donde el manejo de barrera de protección, el control de tratamientos y el tiempo asignado a los pacientes cambiará la forma de realizar la profesión. El presente trabajo pretende resumir las indicaciones y recomendaciones basadas en la evidencia disponible y realizar un análisis de la condiciones de salud oral para Latinoamérica en esta época de pandemia.

COVID-19 is a profound, highly contagious and life-threatening viral disease that will be with us for a long time. Health Care-related professions and life in its entirety are significantly, and perhaps irreversibly affected, all around the World. COVID-19 is and will continue to transform Dentistry and its practise. Based on the available evidence accrued to date, this work attempts to address such changes, current and anticipated, as well as present recommendations for clinical practise implementation, tailored for Latin/South America, in light of such lifealtering momentous pandemic.

Hiposialia y Xerostomía Post Irradiación: Terapias Innovadoras en el Campo Biomolecular / Hyposialia and Xerostomy Post Irradiation: Innovative Therapies in the Biomolecular Field

Las glándulas salivales humanas pueden ser gravemente lesionadas por la radioterapia utilizada contra neoplasias de cabeza y cuello, produciendo hiposialia y xerostomía, las cuales afectan la salud oral y sistémica, mermando la calidad de vida de la persona. Los tratamientos convencionales actuales están diseñados para disminuir los síntomas, sin actuar sobre los cambios fisiopatológicos que se dan a nivel glandular. Esta revisión intenta analizar aquellas terapias preventivas y/o curativas que están desarrollándose en el campo biomolecular y que tienen un futuro prometedor por sus características innovadoras: terapia génica, terapia con células madre y terapia con factores de crecimiento. Se evidencia un aporte adicional de la nanotecnología, la cual está mejorando las vías de aplicación de los tratamientos.

Human salivary glands can be seriously injured by the radiotherapy used against head and neck neoplasms, producing hyposialia and xerostomy, which affect oral and systemic health, diminishing the person's quality of life. Current conventional treatments are designed to reduce symptoms, without acting on the pathophysiological changes that occur at the glandular level. This review attempts to analyze those preventive and /or curative therapies that are developing in the biomolecular field and that have a promising future due to their innovative features: Gene therapy, stem cell therapy and growth factor therapy. An additional contribution of nanotechnology is evident, which is improving the routes of treatment application.

PLA/PGA and its co-Polymers in Alveolar Bone Regeneration. A Systematic Review / PLA/PGA y sus Copolímeros en Regeneración Ósea Alveolar. Una Revisión Sistemática

ABSTRACT: The aim of this research was to perform a systematic review to identify the most frequent uses of PLA/ PGA in alveolar bone regeneration and their results. A study was designed to answer the question: What are the most frequent uses of PLA/PLGA and their copolymers in alveolar bone regeneration?. A systematic search was done on MEDLINE, EMBASE and LILACS from April 1993 to December 2017. The search string used on MEDLINE was: (((polylactic acid) OR PLA) OR PLA-based copolymers) OR PLA blends) OR PLA scaffolds)) AND ((("Bone Regeneration"[Mesh]) OR bone regeneration) OR guided bone regeneration). The search was complemented by a manual review of the references from the articles included. Most of the studies selected were weak and, regarding the most frequent uses of PLA/PGA, 13 studies used it as a resorbable membrane, two as an absorbable mesh, one as an absorbable screw and three as filling material. Based on our results, the authors consider that PLA/PGA requires a delicate relation between the mechanical resistance and the degradation process. PLA/PGA does not interrupt bone regeneration; however, the influence in cellular events related to bone regeneration and later osseointegration have not been identified.

RESUMEN: El objetivo de esta revisión fue realizar una revisión sistemática de la literatura para identificar los usos más frecuentes de PLA/PGA en regeneración ósea en área maxilofacial y sus resultados. Se diseñó un estudio para responder a la pregunta: ¿Cuáles son los usos más frecuentes de PLA/PLGA y sus copolímeros en regeneración ósea en el sector maxilofacial?. Los estudios seleccionados fueron en su mayoría débiles y sobre los usos más frecuentes de PLA/PGA, 13 estudios lo utilizaron como membrana reabsorbible, 2 estudios como malla absorbible, un estudio como tornillo absorbible y 3 estudios como material de relleno. En base a nuestros resultados, los autores estiman que PLA/PGA requiere una delicada relación entre la resistencia mecánica que ofrece y la degradación que se produce; PLA/ PGA no interrumpe la regeneración ósea, sin embargo, no se ha identificado la potencialidad o influencia que presenta en los eventos celulares de la regeneración y posterior oseointegración.

Mathematical Modeling for Pharmaco-Kinetic and -Dynamic Predictions from Controlled Drug Release NanoSystems: A Comparative Parametric Study.

Predicting pharmacokinetics, based on the theory of dynamic systems, for an administered drug (whether intravenously, orally, intramuscularly, etc.), is an industrial and clinical challenge. Often, mathematical modeling of pharmacokinetics is preformed using only a measured concentration time profile of a drug administered in plasma and/or in blood. Yet, in dynamic systems, mathematical modeling (linear) uses both a mathematically described drug administration and a mathematically described body response to the administered drug. In the present work, we compare several mathematical models well known in the literature for simulating controlled drug release kinetics using available experimental data sets obtained in real systems with different drugs and nanosized carriers. We employed the χ 2 minimization method and concluded that the Korsmeyer-Peppas model (or power-law model) provides the best fit, in all cases (the minimum value of χ 2 per degree of freedom; χ min 2/d.o.f. = 1.4183, with 2 free parameters or m = 2). Hence, (i) better understanding of the exact mass transport mechanisms involved in drugs release and (ii) quantitative prediction of drugs release can be computed and simulated. We anticipate that this work will help devise optimal pharmacokinetic and dynamic release systems, with measured variable properties, at nanoscale, characterized to target specific diseases and conditions.